Collections   
Products
Products Center
Customer Inquire
Online Question
Contact us:+86-716-2263156
Your Position : Home - Products - DehydratorProducts

Evaporator LTQS type

Evaporator LTQS type
    Petroleum and petroleum chemical industry fast development ask more for the production technology level and production robotization level. The low level operation affects the comprehensive benefit. Oil tank is the right example. At present, the oil tank dehydration is operated by human beings and it can not control the separation between oil and water and it can cause the waste of oil and pollution to the environment.
 
First, products
 
     LTQS type tank automatic evaporator is the new generation products researched by our company. It was made up by non-corrosive steel. It has reasonable design, simple structure, large amount of water, fast oil backing rate and convenient use. The product can be used in petroleum industry and petroleum chemical industry and it can replace the traditional oil tank.
 
The development of the automatic evaporator is great contribution to the improvement of the production technology and automatic level in the oil production industry. It can reolace the oil tank manpower operation and can control the separation between oil and water. It over comes the dangerous matters.
 
    The product can be fixed under the oil tank. The drainage will be start be the mechanical force generated by buoyancy and closed automatically. It can avoid manpower, resources coast and explosive-proof. It can still reduce the pollution and working strength. It has wide use scope, convenient installation, great safety and high reliability.
 
Second, Use
   
Function: it can be installed under the oil tank or above the drain outlet.
Use: it can be used for the petroleum and petroleum chemical industry production equipments.
                               
Third, features
 
1,  the dehydrating theory broke out the oil tank self water cutting theory.
2,  It solve the problem that the oil can not be back by itself.
3,  After the dehydrating, the evaporator will keep at certain water level to ensure the oil can not flow.
4,  Completed function and wide use scope.
5,  Without easy-damage parts. The use life is long and it is easy to install.
 
Fourth, technology parameter
 
1, operation pressure: ≤0.6Mpa
2, operation temperature: ≤80°C
3, Nominal water cutting amount: 10t/h below12t/h, 15t/h, 20t/h, 30t/h
4, Oil amount≤10mg/L
5, range of application: it can be used in various liquid separation of oil and other chemicals.
 
 
Products structure and size

 

Model
H(mm)
L(mm)
Water cutting amount t/h
Diameter of water entering pipe
Diameter of water existing pipe
Diameter of canister(mm)
Suitable Medium
LTQS-10
660
724
≤10
Dg80
Dg50
Φ500
Used for clean oil or liquid chemical raw materials
LTQS-12
680
724
12
Dg80
Dg50
Φ500
Used for clean oil or liquid chemical raw materials
LTQS-15
700
724
15
Dg80
Dg50
Φ500
Used for clean oil or liquid chemical raw materials
LTQS-15A
700
824
15
Dg80
Dg50
Φ600
Used for clean oil or liquid chemical raw materials or crude oil
LTQS-20A
720
824
20
Dg100
Dg50
Φ600
Used for crude oil, residuum and wax oil
LTQS-30A
720
824
30
Dg100
Dg50
Φ600
Used for crude oil, residuum and wax oil
Fifth, notes
 
1, The valve should use dissection connection.
2, The tube between oil tank and evaporator should be leveling.
3, The elbow of oil tank water existing pipe should be removed.
4, In cold place or for the viscosity oil, the self-vertical temperature control valve should be settled.
5, Cold place oil tank pipe and oil back line should be heated and the thermal should be kept.
6, Large capacity oil tank or oil contains high amount of water.
7, Clean the evaporator timely.
8, Check the evaporator timely and change the sealed ring in time.
9, Notice the gas exhaust.
10, It is normal for the evaporator not to work after meeting the emulsion layers.
 
Evaporator
|Water cutting machine
|Automatic evaporator
|Oil tank automatic water cutting machine
|Storage tank automatic evaporator

 

 

[ Close ]     [ Return ]

a人片